The following table displays error message codes from 9901 to 10000.
Message Code | Description |
---|---|
9901 | A "Default Assignation" is required on the task. |
9902 | A value is required for all "Send to" field of each reminder/alert against this task. |
9903 | A value is required for the "Message Template" of a reminder/alert against this task. |
9904 | The employee %1 is not allowed to work on this task. Please verify the following in the configuration of the Worflow: his role must be assigned to this task and active, it should also be marked as able to "Execute" the task. |
9905 | The Effective To date of the last confirmed version must be less than the Effective From date of the non-confirmed procedure version. |
9906 | You have been unassigned from this task or this task has been closed. Please refresh this page by clicking on the ''Refresh'' icon. |
9907 | A result against this task cannot have a selected "next task" which has a "choose employee" as "default assignation". |
9908 | Are you sure you want to initiate this procedure? |
9909 | You have unread messages. Please check your Message Centre. |
9910 | By changing the priority description, this will rename the priority description all over the Workflow application. Are you sure you want to save this new description? |
9911 | Are you sure you want to delete this procedure? |
9912 | Tasks exist under this procedure version. Are you sure you want to delete this procedure and everything configured under it? |
9913 | Are you sure you want to delete this status? |
9914 | Are you sure you want to confirm this procedure version so employees can start to work with it? |
9915 | Are you sure you want to ignore those warnings and confirm this procedure version? |
9916 | Are you sure you want to create a new procedure? |
9917 | The current changes will be lost. Do you want to continue? |
9918 | Are you sure you want to create a new version of this procedure? |
9919 | Are you sure you want to delete a role? |
9920 | The information exists under this task. Are you sure you want to delete this task and everything under it? |
9921 | Are you sure you want to delete the selected record? |
9922 | The message will be permanently deleted. Are you sure you want to continue? |
9923 | Please select the time type. |
9924 | Please enter the time. |
9926 | Each task must have one role marked as "Show in Flowchart". Please, verify on the Security Tab of the Maintain Tasks screen. |
9927 | Un-assignation of the task is a success. |
9928 | Assignation of the task is a success. |
9929 | The creation of a new procedure has been completed. You can now update this new version of the procedure using the Maintain Procedures screen and the Maintain Tasks screen. |
9930 | You cannot delete the initial task. |
9931 | You cannot delete this status since it is already used in the Maintain Tasks screen. |
9932 | Error(s) or Warning(s) have been found. If error messages are found, this procedure version is considered as not valid and cannot be used. Please, fix errors before the procedure can be validated. |
9933 | The creation of a new version for this procedure has been completed. You can now update this new version of the procedure. |
9934 | The "%1" status has been unselected and is not considered as initial anymore. |
9935 | The version was successfully confirmed. |
9936 | At least one task must be selected. |
9937 | Please select at least one change to apply to the selected tasks. |
9938 | At least one employee must be selected. |
9939 | Assignation has been completed successfully. |
9940 | No employee has been selected. Please select at least one employee to proceed or click on Cancel to exit screen. |
9941 | Please enter required fields. |
9942 | You can't delete this role since it is used in the Maintain Tasks screen. |
9943 | You need to commit or cancel your changes. |
9944 | You cannot delete this task since it is called by a result of another task. |
9945 | You cannot delete the initial task. Please select another task as "initial" before re-proceeding to the deletion of the task. |
9946 | One and only one role must be selected as to "Show in Flowchart". |
9947 | The "%1" task has been unselected and is not considered as initial anymore. Please specify, under the Security Tab of the new "Initial task", which role can initiate this procedure. |
9948 | A same Alert/Reminder exists for this task. Please change values of 'When' and/or 'Message Send To' fields!. |
9949 | You cannot deselect the "Execute the Task" checkbox since the "Pull task" checkbox is selected. |
9950 | The Alert/Reminder that you are trying to delete was already used to send at least one message. You cannot delete this Alert/Reminder. Please inactivate it by deselecting the "Active" checkbox. |
9951 | An error occurred during the "Create" operation: One or more rows have not passed validation. Please resolve the highlighted cells before attempting to save the changes again. |
9952 | The "Sequence of plate" component can not be selected for a personalized component type. |
9953 | The "Number of characters for a plate" has been modified. This can have the consequence that some validations are no longer valid on the tab "Information For Plate Generation". |
9954 | The length of a field must be between 1 and 10. |
9955 | The string of characters that you've entered must have the same length as the one mentionned under the "Length of field" column. |
9956 | Only one line must have the "Sequence of Plate" component for plate type which are not considered as "personalized". |
9957 | One to tree components which are not separators must be selected for each plate type. |
9958 | The total length of all components, including separators, must be smaller than or equal to the maximum configured length allowed for a plate. |
9959 | This structure of a plate already exists and is used for the plate type %1. |
9960 | Only one type of plate, can have the check box "Personalized Plate" selected. |
9961 | You cannot delete this plate type, it's already used in plate's structure. |
9962 | You cannot delete this value, it's used in the plate generation. |
9963 | Please select a Message Template. |
9964 | Please enter a Message Body. |
9965 | Please enter a Message Subject. |
9966 | Error while setting date format. Contact your system administrator. |
9967 | The value must be greater than the start of business time. |
9968 | The duration increment must be greater than zero. |
9969 | You need to remove the other identifiers before removing Identifier Label No.1. |
9970 | All Unique Identifiers for a procedure must be unique and cannot be selected more than once. |
9971 | The time must be greater than zero. |
9972 | The value of this field must be greater than zero. |
9973 | This chassis number was previously assigned to vehicle ID %1. |
9974 | The vehicle's year of manufacture must be greater than 1900 and before %1. |
9975 | The path that leads to the file is too long - more than 150 characters. Please use a shorter path to carry out the upload. |
9976 | This assessment is included in the closed collection case %1. Do you want to continue? |
9977 | This separator is not defined in SIGTAS_RULES, only these separators are used %1. |
9978 | This display sequence already exists for this plate type '%1'. |
9979 | The length of this field must be equalled or smaller than %1 characters. |
9980 | This plate component cannot start or finish by a space. |
9981 | The "Range to" field must be greater than or equal to the "Range from". |
9982 | Only digits or letters can be used for this type of component. |
9983 | This template name exists already. |
9984 | The transaction date should be earlier to or equal than the tax account start date. |
9985 | The record has been successfully inserted. |
9986 | The record has been successfully updated. |
9987 | The record has been successfully deleted. |
9988 | The transfer date must be greater than all start dates of current owners. |
9989 | Application cannot be translated in this language. |
9990 | The application will be translated and may not be available for few seconds. Do you want to continue? |
9991 | Please wait while translating the application. |
9992 | The application is now updated. Please logout and login again to see changes. |
9993 | This opening arrears is included in the closed collection case %1. Do you want to continue? |
9994 | Bank Name entred exceed the maximum size (40 caracters). |
9995 | This bank can be assigned only once to this motor vehicle. |
9996 | The "Recurrent Fee" checkbox cannot be selected since the "Transfer Fee" checkbox is also selected. |
9997 | An assessment exists for this tax account and tax period, it is not possible to modify the imposition base with this end date. |
9998 | You must enter a plate type before choosing a plate number. |
9999 | This report is currently under development. |
10000 | Do you really wish to delete this record? |